Flash stock firmware on Galaxy Note 3 Neo SM-N750

Here is the guide to flash stock firmware on our device. 

Download firmware from here - 

I) Bangladesh - http://rapidgator.net/file/36ba0c121...71615.zip.html

II) India(INU) - http://rapidgator.net/file/af8780e8c...50602.zip.html

III) India(INS) - http://rapidgator.net/file/1ead801e6...72237.zip.html


Procedure - 
1. Download Odin from here - http://rapidgator.net/file/cb00b5952...v3.09.zip.html

2. Extract Firmware zip file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files (optional).

3. Extract Odin zip file and you will get Odin3
v3.09.exe along with few other files.

4. Power off your Android device. Wait 5-6
seconds for vibration to confirm complete
switch off.

5. Now, put the Galaxy Note 3 Neo SM-N750 in
Download Mode by pressing and holding
down the Home & Volume Down button
together while pressing the Power button. A
warning screen will come up; press Volume
Up button to enter Download Mode.

6. Now run Odin3 v3.09.exe (see Step 3) as an
Administrator because Admin privileges is
required to complete the process smoothly
(only applicable Windows Vista and higher).

7. Now connect your device to your PC using
USB cable. An “Added!!” massage will appear
in Odin’s message box. If you don’t get the
same then you should try another USB port
(try USB port located in back in your desktop
PC). If that too don’t work then you should
reinstall the driver. If you successfully see the
“Added!!” message in Odin then you are ready
to go in next step. You should also see COM
port with a number in Yellow if you
successfully added your device.

8. Click the AP Button, and select that .tar.md5
file that you get in Step 2. If you are using old
Odin then add the file to PDA button.

9. In Odin window, make sure only Auto Reboot
and F. Reset Time check boxes are selected.

10. Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing
process.

11. Once flashing completed, your Galaxy Note 3 Neo SM-N750 will restart and soon you will
see a PASS message with green background
in the left-most box at the very top of the
Odin. You can now unplug the USB cable to
disconnect your device from computer.



Congrats! You just updated your Galaxy Note 3 Neo
SM-N750 to Android 4.3 Jelly Bean firmware. Go to
Settings > About device to verify this firmware
update.