How to flash Xperia Z2/Z3 Lollipop 23.1.A.0.690 ftf using Flashtool Manually

How to flash Xperia Z2 Lollipop 23.1.A.0.690 ftf

Step 1 – Download Flashtool

Download Flashtool version 0.9.18.5 (or the latest available) from here.

After downloading above Flashtool, install it.

On opening it, it may ask you to move files stored in F:\Flashtool\firmwares toF:\Users\PC NAME\.flashTool\firmware (Do move the ftf stored if asked to do so).

Wait then till it syncs the devices list (if it don’t syncs because you are not connected to internet, then leave it. It is not mandatory to do sync).

Step 2 – Download Firmware Ftf file

For D6502 INDIA region

Download D6502_23.1.A.0.690_INDIA_GIZMOBOLT.ftf

Step 3 – Put your above download firmware ftf in “F:\Users\PC NAME\.flashTool\firmware” folder

Additional Step :- Install Drivers

Install Drivers from the folder named “Flashtool Drivers” in the location where Flashtool is installed OR just install PC Companion on your PC and connect your device with it and then remove it.

Step 4 – Open FlashTool

Now Open Flashtool. See the “Black Lightning Thunder icon” at the top left corner. Click on it.

Step 5 – Choose Flashmode from Bootmode chooser

Now choose flashmode from given two options.

Step 6 – You will now automatically see your download firmware ftf file in the “firmware” section (left hand side) of Flashtool window. Select your firmware.

Step 7 – Wipe data if you wish

See the right hand side of window under the “Wipe” tag, all three options are checked if, will delete all user data.

So if you don’t want to delete all user user data and don’t want a factory reset then you should uncheck them.

Wiping full data is recommended, though (if you have backup).

Do it: Click on “Flash” button.

Step 8 – Preparing files for flashing

After clicking on “Flash” Button in above step, now FlashTool will prepare firmware ftf selected for flashing.

Step 9 – Connecting phone in FlashMode.

Important: Now enable USB Debugging on your phone and enable unknown sources option in your Xperia device and switch it off.

When prompted the notification of connecting your phone, connect it in flashmode (as chosen above)

How to do ? Press Volume down button and then insert usb in phone, you will see red and green light blink once, it means phone is connected in flashmode now.

As soon as phone is detected by Flashtool, flashing beings and wait till it is finished.

WARNING: Do not cancel the process in between once flashing has started or it will result in boot loop or device not booting up at all.

Disconnect phone as soon as flashing is finished.

Step – 10 Disconnect phone

Now reboot your phone. First reboot after the update will take some time.

You must have Android 5.0.2 Lollipop 23.1.A.0.690 firmware installed on your Xperia Z2 now.